View ALD120-212VFC_4134731.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 2 0 W, S i n g l e O u tput, 2 Channel, Class 2 LED Drivers
Single Outputs Universal Input
ALD120
series
8VDC to 48VDC Outputs Short Circuit Protection Full Safety Approvals for Class 2, Outdoor Wet Locations and LED Lighting
Model Number
ALD120-208VFC ALD120-210VFC ALD120-212VFC ALD120-215VFC ALD120-218VFC ALD120-221VFC ALD120-224VFC ALD120-227VFC ALD120-236VFC ALD120-248VFC
I/P Voltage
90-264 VAC 90-264 VAC 90-264 VAC 90-264 VAC 90-264 VAC 90-264 VAC 90-264 VAC 90-264 VAC 90-264 VAC 90-264 VAC
O/P Voltage
8 VDC 10 VDC 12 VDC 15 VDC 18 VDC 21 VDC 24 VDC 27 VDC 36 VDC 48 VDC
O/P Amps Chan1/Chan2
5/5 5/5 5/5 5/5 5/5 4.57 / 4.57 4.0 / 4.0 3.55 / 3.55 2.66 / 2.66 2.0 / 2.0
Combined Current max.
10A 10A 10A 8A 6.67A 5.7A 5.0A 4.44A 3.33A 2.5A
O/P Watts max.
80W 100W 120W 120W 120W 120W 120W 120W 120W 120W
Ripple/Noise max.
80mV 100mV 120mV 150mV 180mV 210mV 240mV 270mV 360mV 480mV
*Note: All noise measurements made at the output terminals, connected to a 20MHz low pass filter
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASTRODYNE EUROPE: 353 51 561060
1 2 0 W, S i n g l e O u tput, 2 Channel, Class 2 LED Drivers
INPUT SPECIFICATIONS
Input Voltage ALD120 Max. Iin Input Frequency Max. Inrush Current Power Factor 90-264 VAC (120/240 VAC Nominal) 1.6A @ 100 VAC Input 47-63Hz 30A @ 230VAC Input 25C, cold start-up 99%, typ.
ALD120
series
ENVIRONMENTAL SPECIFICATIONS
MTBF Cooling Operating Temp. Storage Temperature Relative Humidity 55K Hrs, FL @ 25C ambient, Based on MIL-217F Convection -20C to +60C FL -40C to +85C 5% to 95%
OUTPUT SPECIFICATIONS
Output Voltage/Current Output Voltage Adjust Max. Output Power Ripple / Noise Efficiency Hold Up Time Start Up Time Transient Response Line Regulation Voltage Mode Load Regulation See Model Chart +10/-25% See Model Chart See Model Chart 80% min. @ FL, 230 VAC Input 16mS @ FL, 100 VAC Input 1 Second, typ. 4mS, FL to 1/2L, 100 VAC Input 1% max. 5% max., (Voltage setting Adjustable via on board pot +5/-25%) Over Current Protection 105% Max per channel (Hiccupmode, Auto-Recovery upon removal of over current condition.* Constant Current Mode Regulation 3% max., (Current setting Adjustable via on board pot +5/-90%) Over Voltage Protection 132% max. * Short Circuit Protection Hiccup Mode, Auto Recovery upon removal of over current condition. *
PHYSICAL SPECIFICATIONS
Case / Design / Material NEMA 3 Design / Aluminum / Potted with AC and DC Wiring Compartments Flange Mount, AC/DC Conduit Entries, Knockouts for 1/2" Conduit and Fittings 11"L x 3.37"W x 2.19"H 3.6 lb (1633g)
Mounting and Connection
Size Weight
COMPLIANCE / SAFETY
EMI / RFI Safety Standards CISPR-22B, FCC-15B EMC EN61000-3-2 (EMC) UL/CUL 1310/1585, Class 2, Outdoor Wet Locations for UL 48 LED Lighting, CE EN60529 - Weatherability of an Enclosure - Rated to IP65
Weatherability Standard
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted
Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASTRODYNE EUROPE: 353 51 561060
1 2 0 W, S i n g l e O u tput, 2 Channel, Class 2 LED Drivers
MECHANICAL DIMENSIONS
ALD120
series
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASTRODYNE EUROPE: 353 51 561060

▲Up To Search▲

Price & Availability of ALD120-212VFC

	To Download ALD120-212VFC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .